SPECIFICATIONS
|
| Input Sensitivity |
0.15µV/d (Min.) |
| Input Signal Range |
- 35mV to 35mV |
| Load Cell excitation |
5 VDC ± 5%, 120mA |
| Load Cell Drive Capacity |
Up to 8 units of load cell at 350Ω. Up to 16 units of load cells at 800Ω (LCC07/LCC11/LCC12) |
| Zero Temperature Coeficient |
±0.2µV/℃ typ. ± 0.1 µV/℃ max. |
| Span Temperature Coeficient |
± 3 ppm/℃ typ. ± ppm/℃ max |
| Non-linearity |
0.005% of full scale |
| Maximum input Noise |
Less than 0.15µVp-p |
| Input impedance |
10MΩ or more |
| A/D Conversion method |
Delta-sigma modulation |
| A/D Internal Resolution |
16,000 counts |
| Maximum Display Resolution |
20,000 counts (maximum) |
| A/D Conversion Rate |
Approximately 10 times/sec |
| Weight Display |
Vacuum Fluorescent Display, 7-digits, 7-segment, 13mm (character height) |
| Annunciator |
Stable, Zero Point, Cross, Net, Tare, Accumulation, kg/l or lb |
| Keys |
StandBy/Operate, Net/Gross, Preset Tare, Tare, Zero, M+, Mode, Print |
| Power Supply |
100 to 240 VAC (to be switched on voltage request), 45 to 65 Hz, 30 VA |
| Net Weight |
Approximately 1.8 kg/4.0 lb |
| Dimensions |
192(W) x 96(H) x 165(D) mm (Compliance with DIN) |
| Panel Cut-out Dimensions |
186(W) x 92(H) mm |
| Operating Temperature |
-5℃ to 40℃ (23℉ to 104℉) |
| Storage Temperature |
-10℃ to 70℃ (14℉ to 158℉) |
OPTIONS
|
| AD-4329-01 |
BDC output (replaces standard RS-232C) |
| AD-4329-02 |
Relay Output (3) 250VAC or 30 VDC |
| AD-4329A-03 |
RS-422/485 |
| AD-4329A-07 |
Analog output (4-20mA) |